Add Infra

vendor/golang.org/x/crypto/LICENSE

@@ -0,0 +1,27 @@
+Copyright 2009 The Go Authors.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google LLC nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

vendor/golang.org/x/crypto/PATENTS

@@ -0,0 +1,22 @@
+Additional IP Rights Grant (Patents)
+
+"This implementation" means the copyrightable works distributed by
+Google as part of the Go project.
+
+Google hereby grants to You a perpetual, worldwide, non-exclusive,
+no-charge, royalty-free, irrevocable (except as stated in this section)
+patent license to make, have made, use, offer to sell, sell, import,
+transfer and otherwise run, modify and propagate the contents of this
+implementation of Go, where such license applies only to those patent
+claims, both currently owned or controlled by Google and acquired in
+the future, licensable by Google that are necessarily infringed by this
+implementation of Go.  This grant does not include claims that would be
+infringed only as a consequence of further modification of this
+implementation.  If you or your agent or exclusive licensee institute or
+order or agree to the institution of patent litigation against any
+entity (including a cross-claim or counterclaim in a lawsuit) alleging
+that this implementation of Go or any code incorporated within this
+implementation of Go constitutes direct or contributory patent
+infringement, or inducement of patent infringement, then any patent
+rights granted to you under this License for this implementation of Go
+shall terminate as of the date such litigation is filed.

vendor/golang.org/x/crypto/bcrypt/base64.go

@@ -0,0 +1,35 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package bcrypt
+
+import "encoding/base64"
+
+const alphabet = "./ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789"
+
+var bcEncoding = base64.NewEncoding(alphabet)
+
+func base64Encode(src []byte) []byte {
+	n := bcEncoding.EncodedLen(len(src))
+	dst := make([]byte, n)
+	bcEncoding.Encode(dst, src)
+	for dst[n-1] == '=' {
+		n--
+	}
+	return dst[:n]
+}
+
+func base64Decode(src []byte) ([]byte, error) {
+	numOfEquals := 4 - (len(src) % 4)
+	for i := 0; i < numOfEquals; i++ {
+		src = append(src, '=')
+	}
+
+	dst := make([]byte, bcEncoding.DecodedLen(len(src)))
+	n, err := bcEncoding.Decode(dst, src)
+	if err != nil {
+		return nil, err
+	}
+	return dst[:n], nil
+}

vendor/golang.org/x/crypto/bcrypt/bcrypt.go

@@ -0,0 +1,304 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package bcrypt implements Provos and Mazières's bcrypt adaptive hashing
+// algorithm. See http://www.usenix.org/event/usenix99/provos/provos.pdf
+package bcrypt
+
+// The code is a port of Provos and Mazières's C implementation.
+import (
+	"crypto/rand"
+	"crypto/subtle"
+	"errors"
+	"fmt"
+	"io"
+	"strconv"
+
+	"golang.org/x/crypto/blowfish"
+)
+
+const (
+	MinCost     int = 4  // the minimum allowable cost as passed in to GenerateFromPassword
+	MaxCost     int = 31 // the maximum allowable cost as passed in to GenerateFromPassword
+	DefaultCost int = 10 // the cost that will actually be set if a cost below MinCost is passed into GenerateFromPassword
+)
+
+// The error returned from CompareHashAndPassword when a password and hash do
+// not match.
+var ErrMismatchedHashAndPassword = errors.New("crypto/bcrypt: hashedPassword is not the hash of the given password")
+
+// The error returned from CompareHashAndPassword when a hash is too short to
+// be a bcrypt hash.
+var ErrHashTooShort = errors.New("crypto/bcrypt: hashedSecret too short to be a bcrypted password")
+
+// The error returned from CompareHashAndPassword when a hash was created with
+// a bcrypt algorithm newer than this implementation.
+type HashVersionTooNewError byte
+
+func (hv HashVersionTooNewError) Error() string {
+	return fmt.Sprintf("crypto/bcrypt: bcrypt algorithm version '%c' requested is newer than current version '%c'", byte(hv), majorVersion)
+}
+
+// The error returned from CompareHashAndPassword when a hash starts with something other than '$'
+type InvalidHashPrefixError byte
+
+func (ih InvalidHashPrefixError) Error() string {
+	return fmt.Sprintf("crypto/bcrypt: bcrypt hashes must start with '$', but hashedSecret started with '%c'", byte(ih))
+}
+
+type InvalidCostError int
+
+func (ic InvalidCostError) Error() string {
+	return fmt.Sprintf("crypto/bcrypt: cost %d is outside allowed range (%d,%d)", int(ic), MinCost, MaxCost)
+}
+
+const (
+	majorVersion       = '2'
+	minorVersion       = 'a'
+	maxSaltSize        = 16
+	maxCryptedHashSize = 23
+	encodedSaltSize    = 22
+	encodedHashSize    = 31
+	minHashSize        = 59
+)
+
+// magicCipherData is an IV for the 64 Blowfish encryption calls in
+// bcrypt(). It's the string "OrpheanBeholderScryDoubt" in big-endian bytes.
+var magicCipherData = []byte{
+	0x4f, 0x72, 0x70, 0x68,
+	0x65, 0x61, 0x6e, 0x42,
+	0x65, 0x68, 0x6f, 0x6c,
+	0x64, 0x65, 0x72, 0x53,
+	0x63, 0x72, 0x79, 0x44,
+	0x6f, 0x75, 0x62, 0x74,
+}
+
+type hashed struct {
+	hash  []byte
+	salt  []byte
+	cost  int // allowed range is MinCost to MaxCost
+	major byte
+	minor byte
+}
+
+// ErrPasswordTooLong is returned when the password passed to
+// GenerateFromPassword is too long (i.e. > 72 bytes).
+var ErrPasswordTooLong = errors.New("bcrypt: password length exceeds 72 bytes")
+
+// GenerateFromPassword returns the bcrypt hash of the password at the given
+// cost. If the cost given is less than MinCost, the cost will be set to
+// DefaultCost, instead. Use CompareHashAndPassword, as defined in this package,
+// to compare the returned hashed password with its cleartext version.
+// GenerateFromPassword does not accept passwords longer than 72 bytes, which
+// is the longest password bcrypt will operate on.
+func GenerateFromPassword(password []byte, cost int) ([]byte, error) {
+	if len(password) > 72 {
+		return nil, ErrPasswordTooLong
+	}
+	p, err := newFromPassword(password, cost)
+	if err != nil {
+		return nil, err
+	}
+	return p.Hash(), nil
+}
+
+// CompareHashAndPassword compares a bcrypt hashed password with its possible
+// plaintext equivalent. Returns nil on success, or an error on failure.
+func CompareHashAndPassword(hashedPassword, password []byte) error {
+	p, err := newFromHash(hashedPassword)
+	if err != nil {
+		return err
+	}
+
+	otherHash, err := bcrypt(password, p.cost, p.salt)
+	if err != nil {
+		return err
+	}
+
+	otherP := &hashed{otherHash, p.salt, p.cost, p.major, p.minor}
+	if subtle.ConstantTimeCompare(p.Hash(), otherP.Hash()) == 1 {
+		return nil
+	}
+
+	return ErrMismatchedHashAndPassword
+}
+
+// Cost returns the hashing cost used to create the given hashed
+// password. When, in the future, the hashing cost of a password system needs
+// to be increased in order to adjust for greater computational power, this
+// function allows one to establish which passwords need to be updated.
+func Cost(hashedPassword []byte) (int, error) {
+	p, err := newFromHash(hashedPassword)
+	if err != nil {
+		return 0, err
+	}
+	return p.cost, nil
+}
+
+func newFromPassword(password []byte, cost int) (*hashed, error) {
+	if cost < MinCost {
+		cost = DefaultCost
+	}
+	p := new(hashed)
+	p.major = majorVersion
+	p.minor = minorVersion
+
+	err := checkCost(cost)
+	if err != nil {
+		return nil, err
+	}
+	p.cost = cost
+
+	unencodedSalt := make([]byte, maxSaltSize)
+	_, err = io.ReadFull(rand.Reader, unencodedSalt)
+	if err != nil {
+		return nil, err
+	}
+
+	p.salt = base64Encode(unencodedSalt)
+	hash, err := bcrypt(password, p.cost, p.salt)
+	if err != nil {
+		return nil, err
+	}
+	p.hash = hash
+	return p, err
+}
+
+func newFromHash(hashedSecret []byte) (*hashed, error) {
+	if len(hashedSecret) < minHashSize {
+		return nil, ErrHashTooShort
+	}
+	p := new(hashed)
+	n, err := p.decodeVersion(hashedSecret)
+	if err != nil {
+		return nil, err
+	}
+	hashedSecret = hashedSecret[n:]
+	n, err = p.decodeCost(hashedSecret)
+	if err != nil {
+		return nil, err
+	}
+	hashedSecret = hashedSecret[n:]
+
+	// The "+2" is here because we'll have to append at most 2 '=' to the salt
+	// when base64 decoding it in expensiveBlowfishSetup().
+	p.salt = make([]byte, encodedSaltSize, encodedSaltSize+2)
+	copy(p.salt, hashedSecret[:encodedSaltSize])
+
+	hashedSecret = hashedSecret[encodedSaltSize:]
+	p.hash = make([]byte, len(hashedSecret))
+	copy(p.hash, hashedSecret)
+
+	return p, nil
+}
+
+func bcrypt(password []byte, cost int, salt []byte) ([]byte, error) {
+	cipherData := make([]byte, len(magicCipherData))
+	copy(cipherData, magicCipherData)
+
+	c, err := expensiveBlowfishSetup(password, uint32(cost), salt)
+	if err != nil {
+		return nil, err
+	}
+
+	for i := 0; i < 24; i += 8 {
+		for j := 0; j < 64; j++ {
+			c.Encrypt(cipherData[i:i+8], cipherData[i:i+8])
+		}
+	}
+
+	// Bug compatibility with C bcrypt implementations. We only encode 23 of
+	// the 24 bytes encrypted.
+	hsh := base64Encode(cipherData[:maxCryptedHashSize])
+	return hsh, nil
+}
+
+func expensiveBlowfishSetup(key []byte, cost uint32, salt []byte) (*blowfish.Cipher, error) {
+	csalt, err := base64Decode(salt)
+	if err != nil {
+		return nil, err
+	}
+
+	// Bug compatibility with C bcrypt implementations. They use the trailing
+	// NULL in the key string during expansion.
+	// We copy the key to prevent changing the underlying array.
+	ckey := append(key[:len(key):len(key)], 0)
+
+	c, err := blowfish.NewSaltedCipher(ckey, csalt)
+	if err != nil {
+		return nil, err
+	}
+
+	var i, rounds uint64
+	rounds = 1 << cost
+	for i = 0; i < rounds; i++ {
+		blowfish.ExpandKey(ckey, c)
+		blowfish.ExpandKey(csalt, c)
+	}
+
+	return c, nil
+}
+
+func (p *hashed) Hash() []byte {
+	arr := make([]byte, 60)
+	arr[0] = '$'
+	arr[1] = p.major
+	n := 2
+	if p.minor != 0 {
+		arr[2] = p.minor
+		n = 3
+	}
+	arr[n] = '$'
+	n++
+	copy(arr[n:], []byte(fmt.Sprintf("%02d", p.cost)))
+	n += 2
+	arr[n] = '$'
+	n++
+	copy(arr[n:], p.salt)
+	n += encodedSaltSize
+	copy(arr[n:], p.hash)
+	n += encodedHashSize
+	return arr[:n]
+}
+
+func (p *hashed) decodeVersion(sbytes []byte) (int, error) {
+	if sbytes[0] != '$' {
+		return -1, InvalidHashPrefixError(sbytes[0])
+	}
+	if sbytes[1] > majorVersion {
+		return -1, HashVersionTooNewError(sbytes[1])
+	}
+	p.major = sbytes[1]
+	n := 3
+	if sbytes[2] != '$' {
+		p.minor = sbytes[2]
+		n++
+	}
+	return n, nil
+}
+
+// sbytes should begin where decodeVersion left off.
+func (p *hashed) decodeCost(sbytes []byte) (int, error) {
+	cost, err := strconv.Atoi(string(sbytes[0:2]))
+	if err != nil {
+		return -1, err
+	}
+	err = checkCost(cost)
+	if err != nil {
+		return -1, err
+	}
+	p.cost = cost
+	return 3, nil
+}
+
+func (p *hashed) String() string {
+	return fmt.Sprintf("&{hash: %#v, salt: %#v, cost: %d, major: %c, minor: %c}", string(p.hash), p.salt, p.cost, p.major, p.minor)
+}
+
+func checkCost(cost int) error {
+	if cost < MinCost || cost > MaxCost {
+		return InvalidCostError(cost)
+	}
+	return nil
+}

vendor/golang.org/x/crypto/blowfish/block.go

@@ -0,0 +1,159 @@
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package blowfish
+
+// getNextWord returns the next big-endian uint32 value from the byte slice
+// at the given position in a circular manner, updating the position.
+func getNextWord(b []byte, pos *int) uint32 {
+	var w uint32
+	j := *pos
+	for i := 0; i < 4; i++ {
+		w = w<<8 | uint32(b[j])
+		j++
+		if j >= len(b) {
+			j = 0
+		}
+	}
+	*pos = j
+	return w
+}
+
+// ExpandKey performs a key expansion on the given *Cipher. Specifically, it
+// performs the Blowfish algorithm's key schedule which sets up the *Cipher's
+// pi and substitution tables for calls to Encrypt. This is used, primarily,
+// by the bcrypt package to reuse the Blowfish key schedule during its
+// set up. It's unlikely that you need to use this directly.
+func ExpandKey(key []byte, c *Cipher) {
+	j := 0
+	for i := 0; i < 18; i++ {
+		// Using inlined getNextWord for performance.
+		var d uint32
+		for k := 0; k < 4; k++ {
+			d = d<<8 | uint32(key[j])
+			j++
+			if j >= len(key) {
+				j = 0
+			}
+		}
+		c.p[i] ^= d
+	}
+
+	var l, r uint32
+	for i := 0; i < 18; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.p[i], c.p[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.s0[i], c.s0[i+1] = l, r
+	}
+	for i := 0; i < 256; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.s1[i], c.s1[i+1] = l, r
+	}
+	for i := 0; i < 256; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.s2[i], c.s2[i+1] = l, r
+	}
+	for i := 0; i < 256; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.s3[i], c.s3[i+1] = l, r
+	}
+}
+
+// This is similar to ExpandKey, but folds the salt during the key
+// schedule. While ExpandKey is essentially expandKeyWithSalt with an all-zero
+// salt passed in, reusing ExpandKey turns out to be a place of inefficiency
+// and specializing it here is useful.
+func expandKeyWithSalt(key []byte, salt []byte, c *Cipher) {
+	j := 0
+	for i := 0; i < 18; i++ {
+		c.p[i] ^= getNextWord(key, &j)
+	}
+
+	j = 0
+	var l, r uint32
+	for i := 0; i < 18; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.p[i], c.p[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.s0[i], c.s0[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.s1[i], c.s1[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.s2[i], c.s2[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.s3[i], c.s3[i+1] = l, r
+	}
+}
+
+func encryptBlock(l, r uint32, c *Cipher) (uint32, uint32) {
+	xl, xr := l, r
+	xl ^= c.p[0]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[1]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[2]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[3]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[4]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[5]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[6]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[7]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[8]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[9]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[10]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[11]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[12]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[13]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[14]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[15]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[16]
+	xr ^= c.p[17]
+	return xr, xl
+}
+
+func decryptBlock(l, r uint32, c *Cipher) (uint32, uint32) {
+	xl, xr := l, r
+	xl ^= c.p[17]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[16]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[15]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[14]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[13]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[12]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[11]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[10]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[9]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[8]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[7]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[6]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[5]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[4]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[3]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[2]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[1]
+	xr ^= c.p[0]
+	return xr, xl
+}

vendor/golang.org/x/crypto/blowfish/cipher.go

@@ -0,0 +1,99 @@
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package blowfish implements Bruce Schneier's Blowfish encryption algorithm.
+//
+// Blowfish is a legacy cipher and its short block size makes it vulnerable to
+// birthday bound attacks (see https://sweet32.info). It should only be used
+// where compatibility with legacy systems, not security, is the goal.
+//
+// Deprecated: any new system should use AES (from crypto/aes, if necessary in
+// an AEAD mode like crypto/cipher.NewGCM) or XChaCha20-Poly1305 (from
+// golang.org/x/crypto/chacha20poly1305).
+package blowfish
+
+// The code is a port of Bruce Schneier's C implementation.
+// See https://www.schneier.com/blowfish.html.
+
+import "strconv"
+
+// The Blowfish block size in bytes.
+const BlockSize = 8
+
+// A Cipher is an instance of Blowfish encryption using a particular key.
+type Cipher struct {
+	p              [18]uint32
+	s0, s1, s2, s3 [256]uint32
+}
+
+type KeySizeError int
+
+func (k KeySizeError) Error() string {
+	return "crypto/blowfish: invalid key size " + strconv.Itoa(int(k))
+}
+
+// NewCipher creates and returns a Cipher.
+// The key argument should be the Blowfish key, from 1 to 56 bytes.
+func NewCipher(key []byte) (*Cipher, error) {
+	var result Cipher
+	if k := len(key); k < 1 || k > 56 {
+		return nil, KeySizeError(k)
+	}
+	initCipher(&result)
+	ExpandKey(key, &result)
+	return &result, nil
+}
+
+// NewSaltedCipher creates a returns a Cipher that folds a salt into its key
+// schedule. For most purposes, NewCipher, instead of NewSaltedCipher, is
+// sufficient and desirable. For bcrypt compatibility, the key can be over 56
+// bytes.
+func NewSaltedCipher(key, salt []byte) (*Cipher, error) {
+	if len(salt) == 0 {
+		return NewCipher(key)
+	}
+	var result Cipher
+	if k := len(key); k < 1 {
+		return nil, KeySizeError(k)
+	}
+	initCipher(&result)
+	expandKeyWithSalt(key, salt, &result)
+	return &result, nil
+}
+
+// BlockSize returns the Blowfish block size, 8 bytes.
+// It is necessary to satisfy the Block interface in the
+// package "crypto/cipher".
+func (c *Cipher) BlockSize() int { return BlockSize }
+
+// Encrypt encrypts the 8-byte buffer src using the key k
+// and stores the result in dst.
+// Note that for amounts of data larger than a block,
+// it is not safe to just call Encrypt on successive blocks;
+// instead, use an encryption mode like CBC (see crypto/cipher/cbc.go).
+func (c *Cipher) Encrypt(dst, src []byte) {
+	l := uint32(src[0])<<24 | uint32(src[1])<<16 | uint32(src[2])<<8 | uint32(src[3])
+	r := uint32(src[4])<<24 | uint32(src[5])<<16 | uint32(src[6])<<8 | uint32(src[7])
+	l, r = encryptBlock(l, r, c)
+	dst[0], dst[1], dst[2], dst[3] = byte(l>>24), byte(l>>16), byte(l>>8), byte(l)
+	dst[4], dst[5], dst[6], dst[7] = byte(r>>24), byte(r>>16), byte(r>>8), byte(r)
+}
+
+// Decrypt decrypts the 8-byte buffer src using the key k
+// and stores the result in dst.
+func (c *Cipher) Decrypt(dst, src []byte) {
+	l := uint32(src[0])<<24 | uint32(src[1])<<16 | uint32(src[2])<<8 | uint32(src[3])
+	r := uint32(src[4])<<24 | uint32(src[5])<<16 | uint32(src[6])<<8 | uint32(src[7])
+	l, r = decryptBlock(l, r, c)
+	dst[0], dst[1], dst[2], dst[3] = byte(l>>24), byte(l>>16), byte(l>>8), byte(l)
+	dst[4], dst[5], dst[6], dst[7] = byte(r>>24), byte(r>>16), byte(r>>8), byte(r)
+}
+
+func initCipher(c *Cipher) {
+	copy(c.p[0:], p[0:])
+	copy(c.s0[0:], s0[0:])
+	copy(c.s1[0:], s1[0:])
+	copy(c.s2[0:], s2[0:])
+	copy(c.s3[0:], s3[0:])
+}

vendor/golang.org/x/crypto/blowfish/const.go

@@ -0,0 +1,199 @@
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// The startup permutation array and substitution boxes.
+// They are the hexadecimal digits of PI; see:
+// https://www.schneier.com/code/constants.txt.
+
+package blowfish
+
+var s0 = [256]uint32{
+	0xd1310ba6, 0x98dfb5ac, 0x2ffd72db, 0xd01adfb7, 0xb8e1afed, 0x6a267e96,
+	0xba7c9045, 0xf12c7f99, 0x24a19947, 0xb3916cf7, 0x0801f2e2, 0x858efc16,
+	0x636920d8, 0x71574e69, 0xa458fea3, 0xf4933d7e, 0x0d95748f, 0x728eb658,
+	0x718bcd58, 0x82154aee, 0x7b54a41d, 0xc25a59b5, 0x9c30d539, 0x2af26013,
+	0xc5d1b023, 0x286085f0, 0xca417918, 0xb8db38ef, 0x8e79dcb0, 0x603a180e,
+	0x6c9e0e8b, 0xb01e8a3e, 0xd71577c1, 0xbd314b27, 0x78af2fda, 0x55605c60,
+	0xe65525f3, 0xaa55ab94, 0x57489862, 0x63e81440, 0x55ca396a, 0x2aab10b6,
+	0xb4cc5c34, 0x1141e8ce, 0xa15486af, 0x7c72e993, 0xb3ee1411, 0x636fbc2a,
+	0x2ba9c55d, 0x741831f6, 0xce5c3e16, 0x9b87931e, 0xafd6ba33, 0x6c24cf5c,
+	0x7a325381, 0x28958677, 0x3b8f4898, 0x6b4bb9af, 0xc4bfe81b, 0x66282193,
+	0x61d809cc, 0xfb21a991, 0x487cac60, 0x5dec8032, 0xef845d5d, 0xe98575b1,
+	0xdc262302, 0xeb651b88, 0x23893e81, 0xd396acc5, 0x0f6d6ff3, 0x83f44239,
+	0x2e0b4482, 0xa4842004, 0x69c8f04a, 0x9e1f9b5e, 0x21c66842, 0xf6e96c9a,
+	0x670c9c61, 0xabd388f0, 0x6a51a0d2, 0xd8542f68, 0x960fa728, 0xab5133a3,
+	0x6eef0b6c, 0x137a3be4, 0xba3bf050, 0x7efb2a98, 0xa1f1651d, 0x39af0176,
+	0x66ca593e, 0x82430e88, 0x8cee8619, 0x456f9fb4, 0x7d84a5c3, 0x3b8b5ebe,
+	0xe06f75d8, 0x85c12073, 0x401a449f, 0x56c16aa6, 0x4ed3aa62, 0x363f7706,
+	0x1bfedf72, 0x429b023d, 0x37d0d724, 0xd00a1248, 0xdb0fead3, 0x49f1c09b,
+	0x075372c9, 0x80991b7b, 0x25d479d8, 0xf6e8def7, 0xe3fe501a, 0xb6794c3b,
+	0x976ce0bd, 0x04c006ba, 0xc1a94fb6, 0x409f60c4, 0x5e5c9ec2, 0x196a2463,
+	0x68fb6faf, 0x3e6c53b5, 0x1339b2eb, 0x3b52ec6f, 0x6dfc511f, 0x9b30952c,
+	0xcc814544, 0xaf5ebd09, 0xbee3d004, 0xde334afd, 0x660f2807, 0x192e4bb3,
+	0xc0cba857, 0x45c8740f, 0xd20b5f39, 0xb9d3fbdb, 0x5579c0bd, 0x1a60320a,
+	0xd6a100c6, 0x402c7279, 0x679f25fe, 0xfb1fa3cc, 0x8ea5e9f8, 0xdb3222f8,
+	0x3c7516df, 0xfd616b15, 0x2f501ec8, 0xad0552ab, 0x323db5fa, 0xfd238760,
+	0x53317b48, 0x3e00df82, 0x9e5c57bb, 0xca6f8ca0, 0x1a87562e, 0xdf1769db,
+	0xd542a8f6, 0x287effc3, 0xac6732c6, 0x8c4f5573, 0x695b27b0, 0xbbca58c8,
+	0xe1ffa35d, 0xb8f011a0, 0x10fa3d98, 0xfd2183b8, 0x4afcb56c, 0x2dd1d35b,
+	0x9a53e479, 0xb6f84565, 0xd28e49bc, 0x4bfb9790, 0xe1ddf2da, 0xa4cb7e33,
+	0x62fb1341, 0xcee4c6e8, 0xef20cada, 0x36774c01, 0xd07e9efe, 0x2bf11fb4,
+	0x95dbda4d, 0xae909198, 0xeaad8e71, 0x6b93d5a0, 0xd08ed1d0, 0xafc725e0,
+	0x8e3c5b2f, 0x8e7594b7, 0x8ff6e2fb, 0xf2122b64, 0x8888b812, 0x900df01c,
+	0x4fad5ea0, 0x688fc31c, 0xd1cff191, 0xb3a8c1ad, 0x2f2f2218, 0xbe0e1777,
+	0xea752dfe, 0x8b021fa1, 0xe5a0cc0f, 0xb56f74e8, 0x18acf3d6, 0xce89e299,
+	0xb4a84fe0, 0xfd13e0b7, 0x7cc43b81, 0xd2ada8d9, 0x165fa266, 0x80957705,
+	0x93cc7314, 0x211a1477, 0xe6ad2065, 0x77b5fa86, 0xc75442f5, 0xfb9d35cf,
+	0xebcdaf0c, 0x7b3e89a0, 0xd6411bd3, 0xae1e7e49, 0x00250e2d, 0x2071b35e,
+	0x226800bb, 0x57b8e0af, 0x2464369b, 0xf009b91e, 0x5563911d, 0x59dfa6aa,
+	0x78c14389, 0xd95a537f, 0x207d5ba2, 0x02e5b9c5, 0x83260376, 0x6295cfa9,
+	0x11c81968, 0x4e734a41, 0xb3472dca, 0x7b14a94a, 0x1b510052, 0x9a532915,
+	0xd60f573f, 0xbc9bc6e4, 0x2b60a476, 0x81e67400, 0x08ba6fb5, 0x571be91f,
+	0xf296ec6b, 0x2a0dd915, 0xb6636521, 0xe7b9f9b6, 0xff34052e, 0xc5855664,
+	0x53b02d5d, 0xa99f8fa1, 0x08ba4799, 0x6e85076a,
+}
+
+var s1 = [256]uint32{
+	0x4b7a70e9, 0xb5b32944, 0xdb75092e, 0xc4192623, 0xad6ea6b0, 0x49a7df7d,
+	0x9cee60b8, 0x8fedb266, 0xecaa8c71, 0x699a17ff, 0x5664526c, 0xc2b19ee1,
+	0x193602a5, 0x75094c29, 0xa0591340, 0xe4183a3e, 0x3f54989a, 0x5b429d65,
+	0x6b8fe4d6, 0x99f73fd6, 0xa1d29c07, 0xefe830f5, 0x4d2d38e6, 0xf0255dc1,
+	0x4cdd2086, 0x8470eb26, 0x6382e9c6, 0x021ecc5e, 0x09686b3f, 0x3ebaefc9,
+	0x3c971814, 0x6b6a70a1, 0x687f3584, 0x52a0e286, 0xb79c5305, 0xaa500737,
+	0x3e07841c, 0x7fdeae5c, 0x8e7d44ec, 0x5716f2b8, 0xb03ada37, 0xf0500c0d,
+	0xf01c1f04, 0x0200b3ff, 0xae0cf51a, 0x3cb574b2, 0x25837a58, 0xdc0921bd,
+	0xd19113f9, 0x7ca92ff6, 0x94324773, 0x22f54701, 0x3ae5e581, 0x37c2dadc,
+	0xc8b57634, 0x9af3dda7, 0xa9446146, 0x0fd0030e, 0xecc8c73e, 0xa4751e41,
+	0xe238cd99, 0x3bea0e2f, 0x3280bba1, 0x183eb331, 0x4e548b38, 0x4f6db908,
+	0x6f420d03, 0xf60a04bf, 0x2cb81290, 0x24977c79, 0x5679b072, 0xbcaf89af,
+	0xde9a771f, 0xd9930810, 0xb38bae12, 0xdccf3f2e, 0x5512721f, 0x2e6b7124,
+	0x501adde6, 0x9f84cd87, 0x7a584718, 0x7408da17, 0xbc9f9abc, 0xe94b7d8c,
+	0xec7aec3a, 0xdb851dfa, 0x63094366, 0xc464c3d2, 0xef1c1847, 0x3215d908,
+	0xdd433b37, 0x24c2ba16, 0x12a14d43, 0x2a65c451, 0x50940002, 0x133ae4dd,
+	0x71dff89e, 0x10314e55, 0x81ac77d6, 0x5f11199b, 0x043556f1, 0xd7a3c76b,
+	0x3c11183b, 0x5924a509, 0xf28fe6ed, 0x97f1fbfa, 0x9ebabf2c, 0x1e153c6e,
+	0x86e34570, 0xeae96fb1, 0x860e5e0a, 0x5a3e2ab3, 0x771fe71c, 0x4e3d06fa,
+	0x2965dcb9, 0x99e71d0f, 0x803e89d6, 0x5266c825, 0x2e4cc978, 0x9c10b36a,
+	0xc6150eba, 0x94e2ea78, 0xa5fc3c53, 0x1e0a2df4, 0xf2f74ea7, 0x361d2b3d,
+	0x1939260f, 0x19c27960, 0x5223a708, 0xf71312b6, 0xebadfe6e, 0xeac31f66,
+	0xe3bc4595, 0xa67bc883, 0xb17f37d1, 0x018cff28, 0xc332ddef, 0xbe6c5aa5,
+	0x65582185, 0x68ab9802, 0xeecea50f, 0xdb2f953b, 0x2aef7dad, 0x5b6e2f84,
+	0x1521b628, 0x29076170, 0xecdd4775, 0x619f1510, 0x13cca830, 0xeb61bd96,
+	0x0334fe1e, 0xaa0363cf, 0xb5735c90, 0x4c70a239, 0xd59e9e0b, 0xcbaade14,
+	0xeecc86bc, 0x60622ca7, 0x9cab5cab, 0xb2f3846e, 0x648b1eaf, 0x19bdf0ca,
+	0xa02369b9, 0x655abb50, 0x40685a32, 0x3c2ab4b3, 0x319ee9d5, 0xc021b8f7,
+	0x9b540b19, 0x875fa099, 0x95f7997e, 0x623d7da8, 0xf837889a, 0x97e32d77,
+	0x11ed935f, 0x16681281, 0x0e358829, 0xc7e61fd6, 0x96dedfa1, 0x7858ba99,
+	0x57f584a5, 0x1b227263, 0x9b83c3ff, 0x1ac24696, 0xcdb30aeb, 0x532e3054,
+	0x8fd948e4, 0x6dbc3128, 0x58ebf2ef, 0x34c6ffea, 0xfe28ed61, 0xee7c3c73,
+	0x5d4a14d9, 0xe864b7e3, 0x42105d14, 0x203e13e0, 0x45eee2b6, 0xa3aaabea,
+	0xdb6c4f15, 0xfacb4fd0, 0xc742f442, 0xef6abbb5, 0x654f3b1d, 0x41cd2105,
+	0xd81e799e, 0x86854dc7, 0xe44b476a, 0x3d816250, 0xcf62a1f2, 0x5b8d2646,
+	0xfc8883a0, 0xc1c7b6a3, 0x7f1524c3, 0x69cb7492, 0x47848a0b, 0x5692b285,
+	0x095bbf00, 0xad19489d, 0x1462b174, 0x23820e00, 0x58428d2a, 0x0c55f5ea,
+	0x1dadf43e, 0x233f7061, 0x3372f092, 0x8d937e41, 0xd65fecf1, 0x6c223bdb,
+	0x7cde3759, 0xcbee7460, 0x4085f2a7, 0xce77326e, 0xa6078084, 0x19f8509e,
+	0xe8efd855, 0x61d99735, 0xa969a7aa, 0xc50c06c2, 0x5a04abfc, 0x800bcadc,
+	0x9e447a2e, 0xc3453484, 0xfdd56705, 0x0e1e9ec9, 0xdb73dbd3, 0x105588cd,
+	0x675fda79, 0xe3674340, 0xc5c43465, 0x713e38d8, 0x3d28f89e, 0xf16dff20,
+	0x153e21e7, 0x8fb03d4a, 0xe6e39f2b, 0xdb83adf7,
+}
+
+var s2 = [256]uint32{
+	0xe93d5a68, 0x948140f7, 0xf64c261c, 0x94692934, 0x411520f7, 0x7602d4f7,
+	0xbcf46b2e, 0xd4a20068, 0xd4082471, 0x3320f46a, 0x43b7d4b7, 0x500061af,
+	0x1e39f62e, 0x97244546, 0x14214f74, 0xbf8b8840, 0x4d95fc1d, 0x96b591af,
+	0x70f4ddd3, 0x66a02f45, 0xbfbc09ec, 0x03bd9785, 0x7fac6dd0, 0x31cb8504,
+	0x96eb27b3, 0x55fd3941, 0xda2547e6, 0xabca0a9a, 0x28507825, 0x530429f4,
+	0x0a2c86da, 0xe9b66dfb, 0x68dc1462, 0xd7486900, 0x680ec0a4, 0x27a18dee,
+	0x4f3ffea2, 0xe887ad8c, 0xb58ce006, 0x7af4d6b6, 0xaace1e7c, 0xd3375fec,
+	0xce78a399, 0x406b2a42, 0x20fe9e35, 0xd9f385b9, 0xee39d7ab, 0x3b124e8b,
+	0x1dc9faf7, 0x4b6d1856, 0x26a36631, 0xeae397b2, 0x3a6efa74, 0xdd5b4332,
+	0x6841e7f7, 0xca7820fb, 0xfb0af54e, 0xd8feb397, 0x454056ac, 0xba489527,
+	0x55533a3a, 0x20838d87, 0xfe6ba9b7, 0xd096954b, 0x55a867bc, 0xa1159a58,
+	0xcca92963, 0x99e1db33, 0xa62a4a56, 0x3f3125f9, 0x5ef47e1c, 0x9029317c,
+	0xfdf8e802, 0x04272f70, 0x80bb155c, 0x05282ce3, 0x95c11548, 0xe4c66d22,
+	0x48c1133f, 0xc70f86dc, 0x07f9c9ee, 0x41041f0f, 0x404779a4, 0x5d886e17,
+	0x325f51eb, 0xd59bc0d1, 0xf2bcc18f, 0x41113564, 0x257b7834, 0x602a9c60,
+	0xdff8e8a3, 0x1f636c1b, 0x0e12b4c2, 0x02e1329e, 0xaf664fd1, 0xcad18115,
+	0x6b2395e0, 0x333e92e1, 0x3b240b62, 0xeebeb922, 0x85b2a20e, 0xe6ba0d99,
+	0xde720c8c, 0x2da2f728, 0xd0127845, 0x95b794fd, 0x647d0862, 0xe7ccf5f0,
+	0x5449a36f, 0x877d48fa, 0xc39dfd27, 0xf33e8d1e, 0x0a476341, 0x992eff74,
+	0x3a6f6eab, 0xf4f8fd37, 0xa812dc60, 0xa1ebddf8, 0x991be14c, 0xdb6e6b0d,
+	0xc67b5510, 0x6d672c37, 0x2765d43b, 0xdcd0e804, 0xf1290dc7, 0xcc00ffa3,
+	0xb5390f92, 0x690fed0b, 0x667b9ffb, 0xcedb7d9c, 0xa091cf0b, 0xd9155ea3,
+	0xbb132f88, 0x515bad24, 0x7b9479bf, 0x763bd6eb, 0x37392eb3, 0xcc115979,
+	0x8026e297, 0xf42e312d, 0x6842ada7, 0xc66a2b3b, 0x12754ccc, 0x782ef11c,
+	0x6a124237, 0xb79251e7, 0x06a1bbe6, 0x4bfb6350, 0x1a6b1018, 0x11caedfa,
+	0x3d25bdd8, 0xe2e1c3c9, 0x44421659, 0x0a121386, 0xd90cec6e, 0xd5abea2a,
+	0x64af674e, 0xda86a85f, 0xbebfe988, 0x64e4c3fe, 0x9dbc8057, 0xf0f7c086,
+	0x60787bf8, 0x6003604d, 0xd1fd8346, 0xf6381fb0, 0x7745ae04, 0xd736fccc,
+	0x83426b33, 0xf01eab71, 0xb0804187, 0x3c005e5f, 0x77a057be, 0xbde8ae24,
+	0x55464299, 0xbf582e61, 0x4e58f48f, 0xf2ddfda2, 0xf474ef38, 0x8789bdc2,
+	0x5366f9c3, 0xc8b38e74, 0xb475f255, 0x46fcd9b9, 0x7aeb2661, 0x8b1ddf84,
+	0x846a0e79, 0x915f95e2, 0x466e598e, 0x20b45770, 0x8cd55591, 0xc902de4c,
+	0xb90bace1, 0xbb8205d0, 0x11a86248, 0x7574a99e, 0xb77f19b6, 0xe0a9dc09,
+	0x662d09a1, 0xc4324633, 0xe85a1f02, 0x09f0be8c, 0x4a99a025, 0x1d6efe10,
+	0x1ab93d1d, 0x0ba5a4df, 0xa186f20f, 0x2868f169, 0xdcb7da83, 0x573906fe,
+	0xa1e2ce9b, 0x4fcd7f52, 0x50115e01, 0xa70683fa, 0xa002b5c4, 0x0de6d027,
+	0x9af88c27, 0x773f8641, 0xc3604c06, 0x61a806b5, 0xf0177a28, 0xc0f586e0,
+	0x006058aa, 0x30dc7d62, 0x11e69ed7, 0x2338ea63, 0x53c2dd94, 0xc2c21634,
+	0xbbcbee56, 0x90bcb6de, 0xebfc7da1, 0xce591d76, 0x6f05e409, 0x4b7c0188,
+	0x39720a3d, 0x7c927c24, 0x86e3725f, 0x724d9db9, 0x1ac15bb4, 0xd39eb8fc,
+	0xed545578, 0x08fca5b5, 0xd83d7cd3, 0x4dad0fc4, 0x1e50ef5e, 0xb161e6f8,
+	0xa28514d9, 0x6c51133c, 0x6fd5c7e7, 0x56e14ec4, 0x362abfce, 0xddc6c837,
+	0xd79a3234, 0x92638212, 0x670efa8e, 0x406000e0,
+}
+
+var s3 = [256]uint32{
+	0x3a39ce37, 0xd3faf5cf, 0xabc27737, 0x5ac52d1b, 0x5cb0679e, 0x4fa33742,
+	0xd3822740, 0x99bc9bbe, 0xd5118e9d, 0xbf0f7315, 0xd62d1c7e, 0xc700c47b,
+	0xb78c1b6b, 0x21a19045, 0xb26eb1be, 0x6a366eb4, 0x5748ab2f, 0xbc946e79,
+	0xc6a376d2, 0x6549c2c8, 0x530ff8ee, 0x468dde7d, 0xd5730a1d, 0x4cd04dc6,
+	0x2939bbdb, 0xa9ba4650, 0xac9526e8, 0xbe5ee304, 0xa1fad5f0, 0x6a2d519a,
+	0x63ef8ce2, 0x9a86ee22, 0xc089c2b8, 0x43242ef6, 0xa51e03aa, 0x9cf2d0a4,
+	0x83c061ba, 0x9be96a4d, 0x8fe51550, 0xba645bd6, 0x2826a2f9, 0xa73a3ae1,
+	0x4ba99586, 0xef5562e9, 0xc72fefd3, 0xf752f7da, 0x3f046f69, 0x77fa0a59,
+	0x80e4a915, 0x87b08601, 0x9b09e6ad, 0x3b3ee593, 0xe990fd5a, 0x9e34d797,
+	0x2cf0b7d9, 0x022b8b51, 0x96d5ac3a, 0x017da67d, 0xd1cf3ed6, 0x7c7d2d28,
+	0x1f9f25cf, 0xadf2b89b, 0x5ad6b472, 0x5a88f54c, 0xe029ac71, 0xe019a5e6,
+	0x47b0acfd, 0xed93fa9b, 0xe8d3c48d, 0x283b57cc, 0xf8d56629, 0x79132e28,
+	0x785f0191, 0xed756055, 0xf7960e44, 0xe3d35e8c, 0x15056dd4, 0x88f46dba,
+	0x03a16125, 0x0564f0bd, 0xc3eb9e15, 0x3c9057a2, 0x97271aec, 0xa93a072a,
+	0x1b3f6d9b, 0x1e6321f5, 0xf59c66fb, 0x26dcf319, 0x7533d928, 0xb155fdf5,
+	0x03563482, 0x8aba3cbb, 0x28517711, 0xc20ad9f8, 0xabcc5167, 0xccad925f,
+	0x4de81751, 0x3830dc8e, 0x379d5862, 0x9320f991, 0xea7a90c2, 0xfb3e7bce,
+	0x5121ce64, 0x774fbe32, 0xa8b6e37e, 0xc3293d46, 0x48de5369, 0x6413e680,
+	0xa2ae0810, 0xdd6db224, 0x69852dfd, 0x09072166, 0xb39a460a, 0x6445c0dd,
+	0x586cdecf, 0x1c20c8ae, 0x5bbef7dd, 0x1b588d40, 0xccd2017f, 0x6bb4e3bb,
+	0xdda26a7e, 0x3a59ff45, 0x3e350a44, 0xbcb4cdd5, 0x72eacea8, 0xfa6484bb,
+	0x8d6612ae, 0xbf3c6f47, 0xd29be463, 0x542f5d9e, 0xaec2771b, 0xf64e6370,
+	0x740e0d8d, 0xe75b1357, 0xf8721671, 0xaf537d5d, 0x4040cb08, 0x4eb4e2cc,
+	0x34d2466a, 0x0115af84, 0xe1b00428, 0x95983a1d, 0x06b89fb4, 0xce6ea048,
+	0x6f3f3b82, 0x3520ab82, 0x011a1d4b, 0x277227f8, 0x611560b1, 0xe7933fdc,
+	0xbb3a792b, 0x344525bd, 0xa08839e1, 0x51ce794b, 0x2f32c9b7, 0xa01fbac9,
+	0xe01cc87e, 0xbcc7d1f6, 0xcf0111c3, 0xa1e8aac7, 0x1a908749, 0xd44fbd9a,
+	0xd0dadecb, 0xd50ada38, 0x0339c32a, 0xc6913667, 0x8df9317c, 0xe0b12b4f,
+	0xf79e59b7, 0x43f5bb3a, 0xf2d519ff, 0x27d9459c, 0xbf97222c, 0x15e6fc2a,
+	0x0f91fc71, 0x9b941525, 0xfae59361, 0xceb69ceb, 0xc2a86459, 0x12baa8d1,
+	0xb6c1075e, 0xe3056a0c, 0x10d25065, 0xcb03a442, 0xe0ec6e0e, 0x1698db3b,
+	0x4c98a0be, 0x3278e964, 0x9f1f9532, 0xe0d392df, 0xd3a0342b, 0x8971f21e,
+	0x1b0a7441, 0x4ba3348c, 0xc5be7120, 0xc37632d8, 0xdf359f8d, 0x9b992f2e,
+	0xe60b6f47, 0x0fe3f11d, 0xe54cda54, 0x1edad891, 0xce6279cf, 0xcd3e7e6f,
+	0x1618b166, 0xfd2c1d05, 0x848fd2c5, 0xf6fb2299, 0xf523f357, 0xa6327623,
+	0x93a83531, 0x56cccd02, 0xacf08162, 0x5a75ebb5, 0x6e163697, 0x88d273cc,
+	0xde966292, 0x81b949d0, 0x4c50901b, 0x71c65614, 0xe6c6c7bd, 0x327a140a,
+	0x45e1d006, 0xc3f27b9a, 0xc9aa53fd, 0x62a80f00, 0xbb25bfe2, 0x35bdd2f6,
+	0x71126905, 0xb2040222, 0xb6cbcf7c, 0xcd769c2b, 0x53113ec0, 0x1640e3d3,
+	0x38abbd60, 0x2547adf0, 0xba38209c, 0xf746ce76, 0x77afa1c5, 0x20756060,
+	0x85cbfe4e, 0x8ae88dd8, 0x7aaaf9b0, 0x4cf9aa7e, 0x1948c25c, 0x02fb8a8c,
+	0x01c36ae4, 0xd6ebe1f9, 0x90d4f869, 0xa65cdea0, 0x3f09252d, 0xc208e69f,
+	0xb74e6132, 0xce77e25b, 0x578fdfe3, 0x3ac372e6,
+}
+
+var p = [18]uint32{
+	0x243f6a88, 0x85a308d3, 0x13198a2e, 0x03707344, 0xa4093822, 0x299f31d0,
+	0x082efa98, 0xec4e6c89, 0x452821e6, 0x38d01377, 0xbe5466cf, 0x34e90c6c,
+	0xc0ac29b7, 0xc97c50dd, 0x3f84d5b5, 0xb5470917, 0x9216d5d9, 0x8979fb1b,
+}

vendor/golang.org/x/crypto/pbkdf2/pbkdf2.go

@@ -0,0 +1,77 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package pbkdf2 implements the key derivation function PBKDF2 as defined in RFC
+2898 / PKCS #5 v2.0.
+
+A key derivation function is useful when encrypting data based on a password
+or any other not-fully-random data. It uses a pseudorandom function to derive
+a secure encryption key based on the password.
+
+While v2.0 of the standard defines only one pseudorandom function to use,
+HMAC-SHA1, the drafted v2.1 specification allows use of all five FIPS Approved
+Hash Functions SHA-1, SHA-224, SHA-256, SHA-384 and SHA-512 for HMAC. To
+choose, you can pass the `New` functions from the different SHA packages to
+pbkdf2.Key.
+*/
+package pbkdf2
+
+import (
+	"crypto/hmac"
+	"hash"
+)
+
+// Key derives a key from the password, salt and iteration count, returning a
+// []byte of length keylen that can be used as cryptographic key. The key is
+// derived based on the method described as PBKDF2 with the HMAC variant using
+// the supplied hash function.
+//
+// For example, to use a HMAC-SHA-1 based PBKDF2 key derivation function, you
+// can get a derived key for e.g. AES-256 (which needs a 32-byte key) by
+// doing:
+//
+//	dk := pbkdf2.Key([]byte("some password"), salt, 4096, 32, sha1.New)
+//
+// Remember to get a good random salt. At least 8 bytes is recommended by the
+// RFC.
+//
+// Using a higher iteration count will increase the cost of an exhaustive
+// search but will also make derivation proportionally slower.
+func Key(password, salt []byte, iter, keyLen int, h func() hash.Hash) []byte {
+	prf := hmac.New(h, password)
+	hashLen := prf.Size()
+	numBlocks := (keyLen + hashLen - 1) / hashLen
+
+	var buf [4]byte
+	dk := make([]byte, 0, numBlocks*hashLen)
+	U := make([]byte, hashLen)
+	for block := 1; block <= numBlocks; block++ {
+		// N.B.: || means concatenation, ^ means XOR
+		// for each block T_i = U_1 ^ U_2 ^ ... ^ U_iter
+		// U_1 = PRF(password, salt || uint(i))
+		prf.Reset()
+		prf.Write(salt)
+		buf[0] = byte(block >> 24)
+		buf[1] = byte(block >> 16)
+		buf[2] = byte(block >> 8)
+		buf[3] = byte(block)
+		prf.Write(buf[:4])
+		dk = prf.Sum(dk)
+		T := dk[len(dk)-hashLen:]
+		copy(U, T)
+
+		// U_n = PRF(password, U_(n-1))
+		for n := 2; n <= iter; n++ {
+			prf.Reset()
+			prf.Write(U)
+			U = U[:0]
+			U = prf.Sum(U)
+			for x := range U {
+				T[x] ^= U[x]
+			}
+		}
+	}
+	return dk[:keyLen]
+}

vendor/golang.org/x/crypto/sha3/doc.go

@@ -0,0 +1,66 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package sha3 implements the SHA-3 fixed-output-length hash functions and
+// the SHAKE variable-output-length hash functions defined by FIPS-202.
+//
+// All types in this package also implement [encoding.BinaryMarshaler],
+// [encoding.BinaryAppender] and [encoding.BinaryUnmarshaler] to marshal and
+// unmarshal the internal state of the hash.
+//
+// Both types of hash function use the "sponge" construction and the Keccak
+// permutation. For a detailed specification see http://keccak.noekeon.org/
+//
+// # Guidance
+//
+// If you aren't sure what function you need, use SHAKE256 with at least 64
+// bytes of output. The SHAKE instances are faster than the SHA3 instances;
+// the latter have to allocate memory to conform to the hash.Hash interface.
+//
+// If you need a secret-key MAC (message authentication code), prepend the
+// secret key to the input, hash with SHAKE256 and read at least 32 bytes of
+// output.
+//
+// # Security strengths
+//
+// The SHA3-x (x equals 224, 256, 384, or 512) functions have a security
+// strength against preimage attacks of x bits. Since they only produce "x"
+// bits of output, their collision-resistance is only "x/2" bits.
+//
+// The SHAKE-256 and -128 functions have a generic security strength of 256 and
+// 128 bits against all attacks, provided that at least 2x bits of their output
+// is used.  Requesting more than 64 or 32 bytes of output, respectively, does
+// not increase the collision-resistance of the SHAKE functions.
+//
+// # The sponge construction
+//
+// A sponge builds a pseudo-random function from a public pseudo-random
+// permutation, by applying the permutation to a state of "rate + capacity"
+// bytes, but hiding "capacity" of the bytes.
+//
+// A sponge starts out with a zero state. To hash an input using a sponge, up
+// to "rate" bytes of the input are XORed into the sponge's state. The sponge
+// is then "full" and the permutation is applied to "empty" it. This process is
+// repeated until all the input has been "absorbed". The input is then padded.
+// The digest is "squeezed" from the sponge in the same way, except that output
+// is copied out instead of input being XORed in.
+//
+// A sponge is parameterized by its generic security strength, which is equal
+// to half its capacity; capacity + rate is equal to the permutation's width.
+// Since the KeccakF-1600 permutation is 1600 bits (200 bytes) wide, this means
+// that the security strength of a sponge instance is equal to (1600 - bitrate) / 2.
+//
+// # Recommendations
+//
+// The SHAKE functions are recommended for most new uses. They can produce
+// output of arbitrary length. SHAKE256, with an output length of at least
+// 64 bytes, provides 256-bit security against all attacks.  The Keccak team
+// recommends it for most applications upgrading from SHA2-512. (NIST chose a
+// much stronger, but much slower, sponge instance for SHA3-512.)
+//
+// The SHA-3 functions are "drop-in" replacements for the SHA-2 functions.
+// They produce output of the same length, with the same security strengths
+// against all attacks. This means, in particular, that SHA3-256 only has
+// 128-bit collision resistance, because its output length is 32 bytes.
+package sha3

vendor/golang.org/x/crypto/sha3/hashes.go

@@ -0,0 +1,128 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package sha3
+
+// This file provides functions for creating instances of the SHA-3
+// and SHAKE hash functions, as well as utility functions for hashing
+// bytes.
+
+import (
+	"crypto"
+	"hash"
+)
+
+// New224 creates a new SHA3-224 hash.
+// Its generic security strength is 224 bits against preimage attacks,
+// and 112 bits against collision attacks.
+func New224() hash.Hash {
+	return new224()
+}
+
+// New256 creates a new SHA3-256 hash.
+// Its generic security strength is 256 bits against preimage attacks,
+// and 128 bits against collision attacks.
+func New256() hash.Hash {
+	return new256()
+}
+
+// New384 creates a new SHA3-384 hash.
+// Its generic security strength is 384 bits against preimage attacks,
+// and 192 bits against collision attacks.
+func New384() hash.Hash {
+	return new384()
+}
+
+// New512 creates a new SHA3-512 hash.
+// Its generic security strength is 512 bits against preimage attacks,
+// and 256 bits against collision attacks.
+func New512() hash.Hash {
+	return new512()
+}
+
+func init() {
+	crypto.RegisterHash(crypto.SHA3_224, New224)
+	crypto.RegisterHash(crypto.SHA3_256, New256)
+	crypto.RegisterHash(crypto.SHA3_384, New384)
+	crypto.RegisterHash(crypto.SHA3_512, New512)
+}
+
+const (
+	dsbyteSHA3   = 0b00000110
+	dsbyteKeccak = 0b00000001
+	dsbyteShake  = 0b00011111
+	dsbyteCShake = 0b00000100
+
+	// rateK[c] is the rate in bytes for Keccak[c] where c is the capacity in
+	// bits. Given the sponge size is 1600 bits, the rate is 1600 - c bits.
+	rateK256  = (1600 - 256) / 8
+	rateK448  = (1600 - 448) / 8
+	rateK512  = (1600 - 512) / 8
+	rateK768  = (1600 - 768) / 8
+	rateK1024 = (1600 - 1024) / 8
+)
+
+func new224Generic() *state {
+	return &state{rate: rateK448, outputLen: 28, dsbyte: dsbyteSHA3}
+}
+
+func new256Generic() *state {
+	return &state{rate: rateK512, outputLen: 32, dsbyte: dsbyteSHA3}
+}
+
+func new384Generic() *state {
+	return &state{rate: rateK768, outputLen: 48, dsbyte: dsbyteSHA3}
+}
+
+func new512Generic() *state {
+	return &state{rate: rateK1024, outputLen: 64, dsbyte: dsbyteSHA3}
+}
+
+// NewLegacyKeccak256 creates a new Keccak-256 hash.
+//
+// Only use this function if you require compatibility with an existing cryptosystem
+// that uses non-standard padding. All other users should use New256 instead.
+func NewLegacyKeccak256() hash.Hash {
+	return &state{rate: rateK512, outputLen: 32, dsbyte: dsbyteKeccak}
+}
+
+// NewLegacyKeccak512 creates a new Keccak-512 hash.
+//
+// Only use this function if you require compatibility with an existing cryptosystem
+// that uses non-standard padding. All other users should use New512 instead.
+func NewLegacyKeccak512() hash.Hash {
+	return &state{rate: rateK1024, outputLen: 64, dsbyte: dsbyteKeccak}
+}
+
+// Sum224 returns the SHA3-224 digest of the data.
+func Sum224(data []byte) (digest [28]byte) {
+	h := New224()
+	h.Write(data)
+	h.Sum(digest[:0])
+	return
+}
+
+// Sum256 returns the SHA3-256 digest of the data.
+func Sum256(data []byte) (digest [32]byte) {
+	h := New256()
+	h.Write(data)
+	h.Sum(digest[:0])
+	return
+}
+
+// Sum384 returns the SHA3-384 digest of the data.
+func Sum384(data []byte) (digest [48]byte) {
+	h := New384()
+	h.Write(data)
+	h.Sum(digest[:0])
+	return
+}
+
+// Sum512 returns the SHA3-512 digest of the data.
+func Sum512(data []byte) (digest [64]byte) {
+	h := New512()
+	h.Write(data)
+	h.Sum(digest[:0])
+	return
+}

vendor/golang.org/x/crypto/sha3/hashes_noasm.go

@@ -0,0 +1,23 @@
+// Copyright 2023 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build !gc || purego || !s390x
+
+package sha3
+
+func new224() *state {
+	return new224Generic()
+}
+
+func new256() *state {
+	return new256Generic()
+}
+
+func new384() *state {
+	return new384Generic()
+}
+
+func new512() *state {
+	return new512Generic()
+}

vendor/golang.org/x/crypto/sha3/keccakf.go

@@ -0,0 +1,414 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build !amd64 || purego || !gc
+
+package sha3
+
+import "math/bits"
+
+// rc stores the round constants for use in the ι step.
+var rc = [24]uint64{
+	0x0000000000000001,
+	0x0000000000008082,
+	0x800000000000808A,
+	0x8000000080008000,
+	0x000000000000808B,
+	0x0000000080000001,
+	0x8000000080008081,
+	0x8000000000008009,
+	0x000000000000008A,
+	0x0000000000000088,
+	0x0000000080008009,
+	0x000000008000000A,
+	0x000000008000808B,
+	0x800000000000008B,
+	0x8000000000008089,
+	0x8000000000008003,
+	0x8000000000008002,
+	0x8000000000000080,
+	0x000000000000800A,
+	0x800000008000000A,
+	0x8000000080008081,
+	0x8000000000008080,
+	0x0000000080000001,
+	0x8000000080008008,
+}
+
+// keccakF1600 applies the Keccak permutation to a 1600b-wide
+// state represented as a slice of 25 uint64s.
+func keccakF1600(a *[25]uint64) {
+	// Implementation translated from Keccak-inplace.c
+	// in the keccak reference code.
+	var t, bc0, bc1, bc2, bc3, bc4, d0, d1, d2, d3, d4 uint64
+
+	for i := 0; i < 24; i += 4 {
+		// Combines the 5 steps in each round into 2 steps.
+		// Unrolls 4 rounds per loop and spreads some steps across rounds.
+
+		// Round 1
+		bc0 = a[0] ^ a[5] ^ a[10] ^ a[15] ^ a[20]
+		bc1 = a[1] ^ a[6] ^ a[11] ^ a[16] ^ a[21]
+		bc2 = a[2] ^ a[7] ^ a[12] ^ a[17] ^ a[22]
+		bc3 = a[3] ^ a[8] ^ a[13] ^ a[18] ^ a[23]
+		bc4 = a[4] ^ a[9] ^ a[14] ^ a[19] ^ a[24]
+		d0 = bc4 ^ (bc1<<1 | bc1>>63)
+		d1 = bc0 ^ (bc2<<1 | bc2>>63)
+		d2 = bc1 ^ (bc3<<1 | bc3>>63)
+		d3 = bc2 ^ (bc4<<1 | bc4>>63)
+		d4 = bc3 ^ (bc0<<1 | bc0>>63)
+
+		bc0 = a[0] ^ d0
+		t = a[6] ^ d1
+		bc1 = bits.RotateLeft64(t, 44)
+		t = a[12] ^ d2
+		bc2 = bits.RotateLeft64(t, 43)
+		t = a[18] ^ d3
+		bc3 = bits.RotateLeft64(t, 21)
+		t = a[24] ^ d4
+		bc4 = bits.RotateLeft64(t, 14)
+		a[0] = bc0 ^ (bc2 &^ bc1) ^ rc[i]
+		a[6] = bc1 ^ (bc3 &^ bc2)
+		a[12] = bc2 ^ (bc4 &^ bc3)
+		a[18] = bc3 ^ (bc0 &^ bc4)
+		a[24] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[10] ^ d0
+		bc2 = bits.RotateLeft64(t, 3)
+		t = a[16] ^ d1
+		bc3 = bits.RotateLeft64(t, 45)
+		t = a[22] ^ d2
+		bc4 = bits.RotateLeft64(t, 61)
+		t = a[3] ^ d3
+		bc0 = bits.RotateLeft64(t, 28)
+		t = a[9] ^ d4
+		bc1 = bits.RotateLeft64(t, 20)
+		a[10] = bc0 ^ (bc2 &^ bc1)
+		a[16] = bc1 ^ (bc3 &^ bc2)
+		a[22] = bc2 ^ (bc4 &^ bc3)
+		a[3] = bc3 ^ (bc0 &^ bc4)
+		a[9] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[20] ^ d0
+		bc4 = bits.RotateLeft64(t, 18)
+		t = a[1] ^ d1
+		bc0 = bits.RotateLeft64(t, 1)
+		t = a[7] ^ d2
+		bc1 = bits.RotateLeft64(t, 6)
+		t = a[13] ^ d3
+		bc2 = bits.RotateLeft64(t, 25)
+		t = a[19] ^ d4
+		bc3 = bits.RotateLeft64(t, 8)
+		a[20] = bc0 ^ (bc2 &^ bc1)
+		a[1] = bc1 ^ (bc3 &^ bc2)
+		a[7] = bc2 ^ (bc4 &^ bc3)
+		a[13] = bc3 ^ (bc0 &^ bc4)
+		a[19] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[5] ^ d0
+		bc1 = bits.RotateLeft64(t, 36)
+		t = a[11] ^ d1
+		bc2 = bits.RotateLeft64(t, 10)
+		t = a[17] ^ d2
+		bc3 = bits.RotateLeft64(t, 15)
+		t = a[23] ^ d3
+		bc4 = bits.RotateLeft64(t, 56)
+		t = a[4] ^ d4
+		bc0 = bits.RotateLeft64(t, 27)
+		a[5] = bc0 ^ (bc2 &^ bc1)
+		a[11] = bc1 ^ (bc3 &^ bc2)
+		a[17] = bc2 ^ (bc4 &^ bc3)
+		a[23] = bc3 ^ (bc0 &^ bc4)
+		a[4] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[15] ^ d0
+		bc3 = bits.RotateLeft64(t, 41)
+		t = a[21] ^ d1
+		bc4 = bits.RotateLeft64(t, 2)
+		t = a[2] ^ d2
+		bc0 = bits.RotateLeft64(t, 62)
+		t = a[8] ^ d3
+		bc1 = bits.RotateLeft64(t, 55)
+		t = a[14] ^ d4
+		bc2 = bits.RotateLeft64(t, 39)
+		a[15] = bc0 ^ (bc2 &^ bc1)
+		a[21] = bc1 ^ (bc3 &^ bc2)
+		a[2] = bc2 ^ (bc4 &^ bc3)
+		a[8] = bc3 ^ (bc0 &^ bc4)
+		a[14] = bc4 ^ (bc1 &^ bc0)
+
+		// Round 2
+		bc0 = a[0] ^ a[5] ^ a[10] ^ a[15] ^ a[20]
+		bc1 = a[1] ^ a[6] ^ a[11] ^ a[16] ^ a[21]
+		bc2 = a[2] ^ a[7] ^ a[12] ^ a[17] ^ a[22]
+		bc3 = a[3] ^ a[8] ^ a[13] ^ a[18] ^ a[23]
+		bc4 = a[4] ^ a[9] ^ a[14] ^ a[19] ^ a[24]
+		d0 = bc4 ^ (bc1<<1 | bc1>>63)
+		d1 = bc0 ^ (bc2<<1 | bc2>>63)
+		d2 = bc1 ^ (bc3<<1 | bc3>>63)
+		d3 = bc2 ^ (bc4<<1 | bc4>>63)
+		d4 = bc3 ^ (bc0<<1 | bc0>>63)
+
+		bc0 = a[0] ^ d0
+		t = a[16] ^ d1
+		bc1 = bits.RotateLeft64(t, 44)
+		t = a[7] ^ d2
+		bc2 = bits.RotateLeft64(t, 43)
+		t = a[23] ^ d3
+		bc3 = bits.RotateLeft64(t, 21)
+		t = a[14] ^ d4
+		bc4 = bits.RotateLeft64(t, 14)
+		a[0] = bc0 ^ (bc2 &^ bc1) ^ rc[i+1]
+		a[16] = bc1 ^ (bc3 &^ bc2)
+		a[7] = bc2 ^ (bc4 &^ bc3)
+		a[23] = bc3 ^ (bc0 &^ bc4)
+		a[14] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[20] ^ d0
+		bc2 = bits.RotateLeft64(t, 3)
+		t = a[11] ^ d1
+		bc3 = bits.RotateLeft64(t, 45)
+		t = a[2] ^ d2
+		bc4 = bits.RotateLeft64(t, 61)
+		t = a[18] ^ d3
+		bc0 = bits.RotateLeft64(t, 28)
+		t = a[9] ^ d4
+		bc1 = bits.RotateLeft64(t, 20)
+		a[20] = bc0 ^ (bc2 &^ bc1)
+		a[11] = bc1 ^ (bc3 &^ bc2)
+		a[2] = bc2 ^ (bc4 &^ bc3)
+		a[18] = bc3 ^ (bc0 &^ bc4)
+		a[9] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[15] ^ d0
+		bc4 = bits.RotateLeft64(t, 18)
+		t = a[6] ^ d1
+		bc0 = bits.RotateLeft64(t, 1)
+		t = a[22] ^ d2
+		bc1 = bits.RotateLeft64(t, 6)
+		t = a[13] ^ d3
+		bc2 = bits.RotateLeft64(t, 25)
+		t = a[4] ^ d4
+		bc3 = bits.RotateLeft64(t, 8)
+		a[15] = bc0 ^ (bc2 &^ bc1)
+		a[6] = bc1 ^ (bc3 &^ bc2)
+		a[22] = bc2 ^ (bc4 &^ bc3)
+		a[13] = bc3 ^ (bc0 &^ bc4)
+		a[4] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[10] ^ d0
+		bc1 = bits.RotateLeft64(t, 36)
+		t = a[1] ^ d1
+		bc2 = bits.RotateLeft64(t, 10)
+		t = a[17] ^ d2
+		bc3 = bits.RotateLeft64(t, 15)
+		t = a[8] ^ d3
+		bc4 = bits.RotateLeft64(t, 56)
+		t = a[24] ^ d4
+		bc0 = bits.RotateLeft64(t, 27)
+		a[10] = bc0 ^ (bc2 &^ bc1)
+		a[1] = bc1 ^ (bc3 &^ bc2)
+		a[17] = bc2 ^ (bc4 &^ bc3)
+		a[8] = bc3 ^ (bc0 &^ bc4)
+		a[24] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[5] ^ d0
+		bc3 = bits.RotateLeft64(t, 41)
+		t = a[21] ^ d1
+		bc4 = bits.RotateLeft64(t, 2)
+		t = a[12] ^ d2
+		bc0 = bits.RotateLeft64(t, 62)
+		t = a[3] ^ d3
+		bc1 = bits.RotateLeft64(t, 55)
+		t = a[19] ^ d4
+		bc2 = bits.RotateLeft64(t, 39)
+		a[5] = bc0 ^ (bc2 &^ bc1)
+		a[21] = bc1 ^ (bc3 &^ bc2)
+		a[12] = bc2 ^ (bc4 &^ bc3)
+		a[3] = bc3 ^ (bc0 &^ bc4)
+		a[19] = bc4 ^ (bc1 &^ bc0)
+
+		// Round 3
+		bc0 = a[0] ^ a[5] ^ a[10] ^ a[15] ^ a[20]
+		bc1 = a[1] ^ a[6] ^ a[11] ^ a[16] ^ a[21]
+		bc2 = a[2] ^ a[7] ^ a[12] ^ a[17] ^ a[22]
+		bc3 = a[3] ^ a[8] ^ a[13] ^ a[18] ^ a[23]
+		bc4 = a[4] ^ a[9] ^ a[14] ^ a[19] ^ a[24]
+		d0 = bc4 ^ (bc1<<1 | bc1>>63)
+		d1 = bc0 ^ (bc2<<1 | bc2>>63)
+		d2 = bc1 ^ (bc3<<1 | bc3>>63)
+		d3 = bc2 ^ (bc4<<1 | bc4>>63)
+		d4 = bc3 ^ (bc0<<1 | bc0>>63)
+
+		bc0 = a[0] ^ d0
+		t = a[11] ^ d1
+		bc1 = bits.RotateLeft64(t, 44)
+		t = a[22] ^ d2
+		bc2 = bits.RotateLeft64(t, 43)
+		t = a[8] ^ d3
+		bc3 = bits.RotateLeft64(t, 21)
+		t = a[19] ^ d4
+		bc4 = bits.RotateLeft64(t, 14)
+		a[0] = bc0 ^ (bc2 &^ bc1) ^ rc[i+2]
+		a[11] = bc1 ^ (bc3 &^ bc2)
+		a[22] = bc2 ^ (bc4 &^ bc3)
+		a[8] = bc3 ^ (bc0 &^ bc4)
+		a[19] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[15] ^ d0
+		bc2 = bits.RotateLeft64(t, 3)
+		t = a[1] ^ d1
+		bc3 = bits.RotateLeft64(t, 45)
+		t = a[12] ^ d2
+		bc4 = bits.RotateLeft64(t, 61)
+		t = a[23] ^ d3
+		bc0 = bits.RotateLeft64(t, 28)
+		t = a[9] ^ d4
+		bc1 = bits.RotateLeft64(t, 20)
+		a[15] = bc0 ^ (bc2 &^ bc1)
+		a[1] = bc1 ^ (bc3 &^ bc2)
+		a[12] = bc2 ^ (bc4 &^ bc3)
+		a[23] = bc3 ^ (bc0 &^ bc4)
+		a[9] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[5] ^ d0
+		bc4 = bits.RotateLeft64(t, 18)
+		t = a[16] ^ d1
+		bc0 = bits.RotateLeft64(t, 1)
+		t = a[2] ^ d2
+		bc1 = bits.RotateLeft64(t, 6)
+		t = a[13] ^ d3
+		bc2 = bits.RotateLeft64(t, 25)
+		t = a[24] ^ d4
+		bc3 = bits.RotateLeft64(t, 8)
+		a[5] = bc0 ^ (bc2 &^ bc1)
+		a[16] = bc1 ^ (bc3 &^ bc2)
+		a[2] = bc2 ^ (bc4 &^ bc3)
+		a[13] = bc3 ^ (bc0 &^ bc4)
+		a[24] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[20] ^ d0
+		bc1 = bits.RotateLeft64(t, 36)
+		t = a[6] ^ d1
+		bc2 = bits.RotateLeft64(t, 10)
+		t = a[17] ^ d2
+		bc3 = bits.RotateLeft64(t, 15)
+		t = a[3] ^ d3
+		bc4 = bits.RotateLeft64(t, 56)
+		t = a[14] ^ d4
+		bc0 = bits.RotateLeft64(t, 27)
+		a[20] = bc0 ^ (bc2 &^ bc1)
+		a[6] = bc1 ^ (bc3 &^ bc2)
+		a[17] = bc2 ^ (bc4 &^ bc3)
+		a[3] = bc3 ^ (bc0 &^ bc4)
+		a[14] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[10] ^ d0
+		bc3 = bits.RotateLeft64(t, 41)
+		t = a[21] ^ d1
+		bc4 = bits.RotateLeft64(t, 2)
+		t = a[7] ^ d2
+		bc0 = bits.RotateLeft64(t, 62)
+		t = a[18] ^ d3
+		bc1 = bits.RotateLeft64(t, 55)
+		t = a[4] ^ d4
+		bc2 = bits.RotateLeft64(t, 39)
+		a[10] = bc0 ^ (bc2 &^ bc1)
+		a[21] = bc1 ^ (bc3 &^ bc2)
+		a[7] = bc2 ^ (bc4 &^ bc3)
+		a[18] = bc3 ^ (bc0 &^ bc4)
+		a[4] = bc4 ^ (bc1 &^ bc0)
+
+		// Round 4
+		bc0 = a[0] ^ a[5] ^ a[10] ^ a[15] ^ a[20]
+		bc1 = a[1] ^ a[6] ^ a[11] ^ a[16] ^ a[21]
+		bc2 = a[2] ^ a[7] ^ a[12] ^ a[17] ^ a[22]
+		bc3 = a[3] ^ a[8] ^ a[13] ^ a[18] ^ a[23]
+		bc4 = a[4] ^ a[9] ^ a[14] ^ a[19] ^ a[24]
+		d0 = bc4 ^ (bc1<<1 | bc1>>63)
+		d1 = bc0 ^ (bc2<<1 | bc2>>63)
+		d2 = bc1 ^ (bc3<<1 | bc3>>63)
+		d3 = bc2 ^ (bc4<<1 | bc4>>63)
+		d4 = bc3 ^ (bc0<<1 | bc0>>63)
+
+		bc0 = a[0] ^ d0
+		t = a[1] ^ d1
+		bc1 = bits.RotateLeft64(t, 44)
+		t = a[2] ^ d2
+		bc2 = bits.RotateLeft64(t, 43)
+		t = a[3] ^ d3
+		bc3 = bits.RotateLeft64(t, 21)
+		t = a[4] ^ d4
+		bc4 = bits.RotateLeft64(t, 14)
+		a[0] = bc0 ^ (bc2 &^ bc1) ^ rc[i+3]
+		a[1] = bc1 ^ (bc3 &^ bc2)
+		a[2] = bc2 ^ (bc4 &^ bc3)
+		a[3] = bc3 ^ (bc0 &^ bc4)
+		a[4] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[5] ^ d0
+		bc2 = bits.RotateLeft64(t, 3)
+		t = a[6] ^ d1
+		bc3 = bits.RotateLeft64(t, 45)
+		t = a[7] ^ d2
+		bc4 = bits.RotateLeft64(t, 61)
+		t = a[8] ^ d3
+		bc0 = bits.RotateLeft64(t, 28)
+		t = a[9] ^ d4
+		bc1 = bits.RotateLeft64(t, 20)
+		a[5] = bc0 ^ (bc2 &^ bc1)
+		a[6] = bc1 ^ (bc3 &^ bc2)
+		a[7] = bc2 ^ (bc4 &^ bc3)
+		a[8] = bc3 ^ (bc0 &^ bc4)
+		a[9] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[10] ^ d0
+		bc4 = bits.RotateLeft64(t, 18)
+		t = a[11] ^ d1
+		bc0 = bits.RotateLeft64(t, 1)
+		t = a[12] ^ d2
+		bc1 = bits.RotateLeft64(t, 6)
+		t = a[13] ^ d3
+		bc2 = bits.RotateLeft64(t, 25)
+		t = a[14] ^ d4
+		bc3 = bits.RotateLeft64(t, 8)
+		a[10] = bc0 ^ (bc2 &^ bc1)
+		a[11] = bc1 ^ (bc3 &^ bc2)
+		a[12] = bc2 ^ (bc4 &^ bc3)
+		a[13] = bc3 ^ (bc0 &^ bc4)
+		a[14] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[15] ^ d0
+		bc1 = bits.RotateLeft64(t, 36)
+		t = a[16] ^ d1
+		bc2 = bits.RotateLeft64(t, 10)
+		t = a[17] ^ d2
+		bc3 = bits.RotateLeft64(t, 15)
+		t = a[18] ^ d3
+		bc4 = bits.RotateLeft64(t, 56)
+		t = a[19] ^ d4
+		bc0 = bits.RotateLeft64(t, 27)
+		a[15] = bc0 ^ (bc2 &^ bc1)
+		a[16] = bc1 ^ (bc3 &^ bc2)
+		a[17] = bc2 ^ (bc4 &^ bc3)
+		a[18] = bc3 ^ (bc0 &^ bc4)
+		a[19] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[20] ^ d0
+		bc3 = bits.RotateLeft64(t, 41)
+		t = a[21] ^ d1
+		bc4 = bits.RotateLeft64(t, 2)
+		t = a[22] ^ d2
+		bc0 = bits.RotateLeft64(t, 62)
+		t = a[23] ^ d3
+		bc1 = bits.RotateLeft64(t, 55)
+		t = a[24] ^ d4
+		bc2 = bits.RotateLeft64(t, 39)
+		a[20] = bc0 ^ (bc2 &^ bc1)
+		a[21] = bc1 ^ (bc3 &^ bc2)
+		a[22] = bc2 ^ (bc4 &^ bc3)
+		a[23] = bc3 ^ (bc0 &^ bc4)
+		a[24] = bc4 ^ (bc1 &^ bc0)
+	}
+}

vendor/golang.org/x/crypto/sha3/keccakf_amd64.go

@@ -0,0 +1,13 @@
+// Copyright 2015 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build amd64 && !purego && gc
+
+package sha3
+
+// This function is implemented in keccakf_amd64.s.
+
+//go:noescape
+
+func keccakF1600(a *[25]uint64)

vendor/golang.org/x/crypto/sha3/sha3.go

@@ -0,0 +1,244 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package sha3
+
+import (
+	"crypto/subtle"
+	"encoding/binary"
+	"errors"
+	"unsafe"
+
+	"golang.org/x/sys/cpu"
+)
+
+// spongeDirection indicates the direction bytes are flowing through the sponge.
+type spongeDirection int
+
+const (
+	// spongeAbsorbing indicates that the sponge is absorbing input.
+	spongeAbsorbing spongeDirection = iota
+	// spongeSqueezing indicates that the sponge is being squeezed.
+	spongeSqueezing
+)
+
+type state struct {
+	a [1600 / 8]byte // main state of the hash
+
+	// a[n:rate] is the buffer. If absorbing, it's the remaining space to XOR
+	// into before running the permutation. If squeezing, it's the remaining
+	// output to produce before running the permutation.
+	n, rate int
+
+	// dsbyte contains the "domain separation" bits and the first bit of
+	// the padding. Sections 6.1 and 6.2 of [1] separate the outputs of the
+	// SHA-3 and SHAKE functions by appending bitstrings to the message.
+	// Using a little-endian bit-ordering convention, these are "01" for SHA-3
+	// and "1111" for SHAKE, or 00000010b and 00001111b, respectively. Then the
+	// padding rule from section 5.1 is applied to pad the message to a multiple
+	// of the rate, which involves adding a "1" bit, zero or more "0" bits, and
+	// a final "1" bit. We merge the first "1" bit from the padding into dsbyte,
+	// giving 00000110b (0x06) and 00011111b (0x1f).
+	// [1] http://csrc.nist.gov/publications/drafts/fips-202/fips_202_draft.pdf
+	//     "Draft FIPS 202: SHA-3 Standard: Permutation-Based Hash and
+	//      Extendable-Output Functions (May 2014)"
+	dsbyte byte
+
+	outputLen int             // the default output size in bytes
+	state     spongeDirection // whether the sponge is absorbing or squeezing
+}
+
+// BlockSize returns the rate of sponge underlying this hash function.
+func (d *state) BlockSize() int { return d.rate }
+
+// Size returns the output size of the hash function in bytes.
+func (d *state) Size() int { return d.outputLen }
+
+// Reset clears the internal state by zeroing the sponge state and
+// the buffer indexes, and setting Sponge.state to absorbing.
+func (d *state) Reset() {
+	// Zero the permutation's state.
+	for i := range d.a {
+		d.a[i] = 0
+	}
+	d.state = spongeAbsorbing
+	d.n = 0
+}
+
+func (d *state) clone() *state {
+	ret := *d
+	return &ret
+}
+
+// permute applies the KeccakF-1600 permutation.
+func (d *state) permute() {
+	var a *[25]uint64
+	if cpu.IsBigEndian {
+		a = new([25]uint64)
+		for i := range a {
+			a[i] = binary.LittleEndian.Uint64(d.a[i*8:])
+		}
+	} else {
+		a = (*[25]uint64)(unsafe.Pointer(&d.a))
+	}
+
+	keccakF1600(a)
+	d.n = 0
+
+	if cpu.IsBigEndian {
+		for i := range a {
+			binary.LittleEndian.PutUint64(d.a[i*8:], a[i])
+		}
+	}
+}
+
+// pads appends the domain separation bits in dsbyte, applies
+// the multi-bitrate 10..1 padding rule, and permutes the state.
+func (d *state) padAndPermute() {
+	// Pad with this instance's domain-separator bits. We know that there's
+	// at least one byte of space in the sponge because, if it were full,
+	// permute would have been called to empty it. dsbyte also contains the
+	// first one bit for the padding. See the comment in the state struct.
+	d.a[d.n] ^= d.dsbyte
+	// This adds the final one bit for the padding. Because of the way that
+	// bits are numbered from the LSB upwards, the final bit is the MSB of
+	// the last byte.
+	d.a[d.rate-1] ^= 0x80
+	// Apply the permutation
+	d.permute()
+	d.state = spongeSqueezing
+}
+
+// Write absorbs more data into the hash's state. It panics if any
+// output has already been read.
+func (d *state) Write(p []byte) (n int, err error) {
+	if d.state != spongeAbsorbing {
+		panic("sha3: Write after Read")
+	}
+
+	n = len(p)
+
+	for len(p) > 0 {
+		x := subtle.XORBytes(d.a[d.n:d.rate], d.a[d.n:d.rate], p)
+		d.n += x
+		p = p[x:]
+
+		// If the sponge is full, apply the permutation.
+		if d.n == d.rate {
+			d.permute()
+		}
+	}
+
+	return
+}
+
+// Read squeezes an arbitrary number of bytes from the sponge.
+func (d *state) Read(out []byte) (n int, err error) {
+	// If we're still absorbing, pad and apply the permutation.
+	if d.state == spongeAbsorbing {
+		d.padAndPermute()
+	}
+
+	n = len(out)
+
+	// Now, do the squeezing.
+	for len(out) > 0 {
+		// Apply the permutation if we've squeezed the sponge dry.
+		if d.n == d.rate {
+			d.permute()
+		}
+
+		x := copy(out, d.a[d.n:d.rate])
+		d.n += x
+		out = out[x:]
+	}
+
+	return
+}
+
+// Sum applies padding to the hash state and then squeezes out the desired
+// number of output bytes. It panics if any output has already been read.
+func (d *state) Sum(in []byte) []byte {
+	if d.state != spongeAbsorbing {
+		panic("sha3: Sum after Read")
+	}
+
+	// Make a copy of the original hash so that caller can keep writing
+	// and summing.
+	dup := d.clone()
+	hash := make([]byte, dup.outputLen, 64) // explicit cap to allow stack allocation
+	dup.Read(hash)
+	return append(in, hash...)
+}
+
+const (
+	magicSHA3   = "sha\x08"
+	magicShake  = "sha\x09"
+	magicCShake = "sha\x0a"
+	magicKeccak = "sha\x0b"
+	// magic || rate || main state || n || sponge direction
+	marshaledSize = len(magicSHA3) + 1 + 200 + 1 + 1
+)
+
+func (d *state) MarshalBinary() ([]byte, error) {
+	return d.AppendBinary(make([]byte, 0, marshaledSize))
+}
+
+func (d *state) AppendBinary(b []byte) ([]byte, error) {
+	switch d.dsbyte {
+	case dsbyteSHA3:
+		b = append(b, magicSHA3...)
+	case dsbyteShake:
+		b = append(b, magicShake...)
+	case dsbyteCShake:
+		b = append(b, magicCShake...)
+	case dsbyteKeccak:
+		b = append(b, magicKeccak...)
+	default:
+		panic("unknown dsbyte")
+	}
+	// rate is at most 168, and n is at most rate.
+	b = append(b, byte(d.rate))
+	b = append(b, d.a[:]...)
+	b = append(b, byte(d.n), byte(d.state))
+	return b, nil
+}
+
+func (d *state) UnmarshalBinary(b []byte) error {
+	if len(b) != marshaledSize {
+		return errors.New("sha3: invalid hash state")
+	}
+
+	magic := string(b[:len(magicSHA3)])
+	b = b[len(magicSHA3):]
+	switch {
+	case magic == magicSHA3 && d.dsbyte == dsbyteSHA3:
+	case magic == magicShake && d.dsbyte == dsbyteShake:
+	case magic == magicCShake && d.dsbyte == dsbyteCShake:
+	case magic == magicKeccak && d.dsbyte == dsbyteKeccak:
+	default:
+		return errors.New("sha3: invalid hash state identifier")
+	}
+
+	rate := int(b[0])
+	b = b[1:]
+	if rate != d.rate {
+		return errors.New("sha3: invalid hash state function")
+	}
+
+	copy(d.a[:], b)
+	b = b[len(d.a):]
+
+	n, state := int(b[0]), spongeDirection(b[1])
+	if n > d.rate {
+		return errors.New("sha3: invalid hash state")
+	}
+	d.n = n
+	if state != spongeAbsorbing && state != spongeSqueezing {
+		return errors.New("sha3: invalid hash state")
+	}
+	d.state = state
+
+	return nil
+}

vendor/golang.org/x/crypto/sha3/sha3_s390x.go

@@ -0,0 +1,303 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build gc && !purego
+
+package sha3
+
+// This file contains code for using the 'compute intermediate
+// message digest' (KIMD) and 'compute last message digest' (KLMD)
+// instructions to compute SHA-3 and SHAKE hashes on IBM Z.
+
+import (
+	"hash"
+
+	"golang.org/x/sys/cpu"
+)
+
+// codes represent 7-bit KIMD/KLMD function codes as defined in
+// the Principles of Operation.
+type code uint64
+
+const (
+	// function codes for KIMD/KLMD
+	sha3_224  code = 32
+	sha3_256       = 33
+	sha3_384       = 34
+	sha3_512       = 35
+	shake_128      = 36
+	shake_256      = 37
+	nopad          = 0x100
+)
+
+// kimd is a wrapper for the 'compute intermediate message digest' instruction.
+// src must be a multiple of the rate for the given function code.
+//
+//go:noescape
+func kimd(function code, chain *[200]byte, src []byte)
+
+// klmd is a wrapper for the 'compute last message digest' instruction.
+// src padding is handled by the instruction.
+//
+//go:noescape
+func klmd(function code, chain *[200]byte, dst, src []byte)
+
+type asmState struct {
+	a         [200]byte       // 1600 bit state
+	buf       []byte          // care must be taken to ensure cap(buf) is a multiple of rate
+	rate      int             // equivalent to block size
+	storage   [3072]byte      // underlying storage for buf
+	outputLen int             // output length for full security
+	function  code            // KIMD/KLMD function code
+	state     spongeDirection // whether the sponge is absorbing or squeezing
+}
+
+func newAsmState(function code) *asmState {
+	var s asmState
+	s.function = function
+	switch function {
+	case sha3_224:
+		s.rate = 144
+		s.outputLen = 28
+	case sha3_256:
+		s.rate = 136
+		s.outputLen = 32
+	case sha3_384:
+		s.rate = 104
+		s.outputLen = 48
+	case sha3_512:
+		s.rate = 72
+		s.outputLen = 64
+	case shake_128:
+		s.rate = 168
+		s.outputLen = 32
+	case shake_256:
+		s.rate = 136
+		s.outputLen = 64
+	default:
+		panic("sha3: unrecognized function code")
+	}
+
+	// limit s.buf size to a multiple of s.rate
+	s.resetBuf()
+	return &s
+}
+
+func (s *asmState) clone() *asmState {
+	c := *s
+	c.buf = c.storage[:len(s.buf):cap(s.buf)]
+	return &c
+}
+
+// copyIntoBuf copies b into buf. It will panic if there is not enough space to
+// store all of b.
+func (s *asmState) copyIntoBuf(b []byte) {
+	bufLen := len(s.buf)
+	s.buf = s.buf[:len(s.buf)+len(b)]
+	copy(s.buf[bufLen:], b)
+}
+
+// resetBuf points buf at storage, sets the length to 0 and sets cap to be a
+// multiple of the rate.
+func (s *asmState) resetBuf() {
+	max := (cap(s.storage) / s.rate) * s.rate
+	s.buf = s.storage[:0:max]
+}
+
+// Write (via the embedded io.Writer interface) adds more data to the running hash.
+// It never returns an error.
+func (s *asmState) Write(b []byte) (int, error) {
+	if s.state != spongeAbsorbing {
+		panic("sha3: Write after Read")
+	}
+	length := len(b)
+	for len(b) > 0 {
+		if len(s.buf) == 0 && len(b) >= cap(s.buf) {
+			// Hash the data directly and push any remaining bytes
+			// into the buffer.
+			remainder := len(b) % s.rate
+			kimd(s.function, &s.a, b[:len(b)-remainder])
+			if remainder != 0 {
+				s.copyIntoBuf(b[len(b)-remainder:])
+			}
+			return length, nil
+		}
+
+		if len(s.buf) == cap(s.buf) {
+			// flush the buffer
+			kimd(s.function, &s.a, s.buf)
+			s.buf = s.buf[:0]
+		}
+
+		// copy as much as we can into the buffer
+		n := len(b)
+		if len(b) > cap(s.buf)-len(s.buf) {
+			n = cap(s.buf) - len(s.buf)
+		}
+		s.copyIntoBuf(b[:n])
+		b = b[n:]
+	}
+	return length, nil
+}
+
+// Read squeezes an arbitrary number of bytes from the sponge.
+func (s *asmState) Read(out []byte) (n int, err error) {
+	// The 'compute last message digest' instruction only stores the digest
+	// at the first operand (dst) for SHAKE functions.
+	if s.function != shake_128 && s.function != shake_256 {
+		panic("sha3: can only call Read for SHAKE functions")
+	}
+
+	n = len(out)
+
+	// need to pad if we were absorbing
+	if s.state == spongeAbsorbing {
+		s.state = spongeSqueezing
+
+		// write hash directly into out if possible
+		if len(out)%s.rate == 0 {
+			klmd(s.function, &s.a, out, s.buf) // len(out) may be 0
+			s.buf = s.buf[:0]
+			return
+		}
+
+		// write hash into buffer
+		max := cap(s.buf)
+		if max > len(out) {
+			max = (len(out)/s.rate)*s.rate + s.rate
+		}
+		klmd(s.function, &s.a, s.buf[:max], s.buf)
+		s.buf = s.buf[:max]
+	}
+
+	for len(out) > 0 {
+		// flush the buffer
+		if len(s.buf) != 0 {
+			c := copy(out, s.buf)
+			out = out[c:]
+			s.buf = s.buf[c:]
+			continue
+		}
+
+		// write hash directly into out if possible
+		if len(out)%s.rate == 0 {
+			klmd(s.function|nopad, &s.a, out, nil)
+			return
+		}
+
+		// write hash into buffer
+		s.resetBuf()
+		if cap(s.buf) > len(out) {
+			s.buf = s.buf[:(len(out)/s.rate)*s.rate+s.rate]
+		}
+		klmd(s.function|nopad, &s.a, s.buf, nil)
+	}
+	return
+}
+
+// Sum appends the current hash to b and returns the resulting slice.
+// It does not change the underlying hash state.
+func (s *asmState) Sum(b []byte) []byte {
+	if s.state != spongeAbsorbing {
+		panic("sha3: Sum after Read")
+	}
+
+	// Copy the state to preserve the original.
+	a := s.a
+
+	// Hash the buffer. Note that we don't clear it because we
+	// aren't updating the state.
+	switch s.function {
+	case sha3_224, sha3_256, sha3_384, sha3_512:
+		klmd(s.function, &a, nil, s.buf)
+		return append(b, a[:s.outputLen]...)
+	case shake_128, shake_256:
+		d := make([]byte, s.outputLen, 64)
+		klmd(s.function, &a, d, s.buf)
+		return append(b, d[:s.outputLen]...)
+	default:
+		panic("sha3: unknown function")
+	}
+}
+
+// Reset resets the Hash to its initial state.
+func (s *asmState) Reset() {
+	for i := range s.a {
+		s.a[i] = 0
+	}
+	s.resetBuf()
+	s.state = spongeAbsorbing
+}
+
+// Size returns the number of bytes Sum will return.
+func (s *asmState) Size() int {
+	return s.outputLen
+}
+
+// BlockSize returns the hash's underlying block size.
+// The Write method must be able to accept any amount
+// of data, but it may operate more efficiently if all writes
+// are a multiple of the block size.
+func (s *asmState) BlockSize() int {
+	return s.rate
+}
+
+// Clone returns a copy of the ShakeHash in its current state.
+func (s *asmState) Clone() ShakeHash {
+	return s.clone()
+}
+
+// new224 returns an assembly implementation of SHA3-224 if available,
+// otherwise it returns a generic implementation.
+func new224() hash.Hash {
+	if cpu.S390X.HasSHA3 {
+		return newAsmState(sha3_224)
+	}
+	return new224Generic()
+}
+
+// new256 returns an assembly implementation of SHA3-256 if available,
+// otherwise it returns a generic implementation.
+func new256() hash.Hash {
+	if cpu.S390X.HasSHA3 {
+		return newAsmState(sha3_256)
+	}
+	return new256Generic()
+}
+
+// new384 returns an assembly implementation of SHA3-384 if available,
+// otherwise it returns a generic implementation.
+func new384() hash.Hash {
+	if cpu.S390X.HasSHA3 {
+		return newAsmState(sha3_384)
+	}
+	return new384Generic()
+}
+
+// new512 returns an assembly implementation of SHA3-512 if available,
+// otherwise it returns a generic implementation.
+func new512() hash.Hash {
+	if cpu.S390X.HasSHA3 {
+		return newAsmState(sha3_512)
+	}
+	return new512Generic()
+}
+
+// newShake128 returns an assembly implementation of SHAKE-128 if available,
+// otherwise it returns a generic implementation.
+func newShake128() ShakeHash {
+	if cpu.S390X.HasSHA3 {
+		return newAsmState(shake_128)
+	}
+	return newShake128Generic()
+}
+
+// newShake256 returns an assembly implementation of SHAKE-256 if available,
+// otherwise it returns a generic implementation.
+func newShake256() ShakeHash {
+	if cpu.S390X.HasSHA3 {
+		return newAsmState(shake_256)
+	}
+	return newShake256Generic()
+}

vendor/golang.org/x/crypto/sha3/sha3_s390x.s

@@ -0,0 +1,33 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build gc && !purego
+
+#include "textflag.h"
+
+// func kimd(function code, chain *[200]byte, src []byte)
+TEXT ·kimd(SB), NOFRAME|NOSPLIT, $0-40
+	MOVD function+0(FP), R0
+	MOVD chain+8(FP), R1
+	LMG  src+16(FP), R2, R3 // R2=base, R3=len
+
+continue:
+	WORD $0xB93E0002 // KIMD --, R2
+	BVS  continue    // continue if interrupted
+	MOVD $0, R0      // reset R0 for pre-go1.8 compilers
+	RET
+
+// func klmd(function code, chain *[200]byte, dst, src []byte)
+TEXT ·klmd(SB), NOFRAME|NOSPLIT, $0-64
+	// TODO: SHAKE support
+	MOVD function+0(FP), R0
+	MOVD chain+8(FP), R1
+	LMG  dst+16(FP), R2, R3 // R2=base, R3=len
+	LMG  src+40(FP), R4, R5 // R4=base, R5=len
+
+continue:
+	WORD $0xB93F0024 // KLMD R2, R4
+	BVS  continue    // continue if interrupted
+	MOVD $0, R0      // reset R0 for pre-go1.8 compilers
+	RET

vendor/golang.org/x/crypto/sha3/shake.go

@@ -0,0 +1,193 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package sha3
+
+// This file defines the ShakeHash interface, and provides
+// functions for creating SHAKE and cSHAKE instances, as well as utility
+// functions for hashing bytes to arbitrary-length output.
+//
+//
+// SHAKE implementation is based on FIPS PUB 202 [1]
+// cSHAKE implementations is based on NIST SP 800-185 [2]
+//
+// [1] https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf
+// [2] https://doi.org/10.6028/NIST.SP.800-185
+
+import (
+	"bytes"
+	"encoding/binary"
+	"errors"
+	"hash"
+	"io"
+	"math/bits"
+)
+
+// ShakeHash defines the interface to hash functions that support
+// arbitrary-length output. When used as a plain [hash.Hash], it
+// produces minimum-length outputs that provide full-strength generic
+// security.
+type ShakeHash interface {
+	hash.Hash
+
+	// Read reads more output from the hash; reading affects the hash's
+	// state. (ShakeHash.Read is thus very different from Hash.Sum)
+	// It never returns an error, but subsequent calls to Write or Sum
+	// will panic.
+	io.Reader
+
+	// Clone returns a copy of the ShakeHash in its current state.
+	Clone() ShakeHash
+}
+
+// cSHAKE specific context
+type cshakeState struct {
+	*state // SHA-3 state context and Read/Write operations
+
+	// initBlock is the cSHAKE specific initialization set of bytes. It is initialized
+	// by newCShake function and stores concatenation of N followed by S, encoded
+	// by the method specified in 3.3 of [1].
+	// It is stored here in order for Reset() to be able to put context into
+	// initial state.
+	initBlock []byte
+}
+
+func bytepad(data []byte, rate int) []byte {
+	out := make([]byte, 0, 9+len(data)+rate-1)
+	out = append(out, leftEncode(uint64(rate))...)
+	out = append(out, data...)
+	if padlen := rate - len(out)%rate; padlen < rate {
+		out = append(out, make([]byte, padlen)...)
+	}
+	return out
+}
+
+func leftEncode(x uint64) []byte {
+	// Let n be the smallest positive integer for which 2^(8n) > x.
+	n := (bits.Len64(x) + 7) / 8
+	if n == 0 {
+		n = 1
+	}
+	// Return n || x with n as a byte and x an n bytes in big-endian order.
+	b := make([]byte, 9)
+	binary.BigEndian.PutUint64(b[1:], x)
+	b = b[9-n-1:]
+	b[0] = byte(n)
+	return b
+}
+
+func newCShake(N, S []byte, rate, outputLen int, dsbyte byte) ShakeHash {
+	c := cshakeState{state: &state{rate: rate, outputLen: outputLen, dsbyte: dsbyte}}
+	c.initBlock = make([]byte, 0, 9+len(N)+9+len(S)) // leftEncode returns max 9 bytes
+	c.initBlock = append(c.initBlock, leftEncode(uint64(len(N))*8)...)
+	c.initBlock = append(c.initBlock, N...)
+	c.initBlock = append(c.initBlock, leftEncode(uint64(len(S))*8)...)
+	c.initBlock = append(c.initBlock, S...)
+	c.Write(bytepad(c.initBlock, c.rate))
+	return &c
+}
+
+// Reset resets the hash to initial state.
+func (c *cshakeState) Reset() {
+	c.state.Reset()
+	c.Write(bytepad(c.initBlock, c.rate))
+}
+
+// Clone returns copy of a cSHAKE context within its current state.
+func (c *cshakeState) Clone() ShakeHash {
+	b := make([]byte, len(c.initBlock))
+	copy(b, c.initBlock)
+	return &cshakeState{state: c.clone(), initBlock: b}
+}
+
+// Clone returns copy of SHAKE context within its current state.
+func (c *state) Clone() ShakeHash {
+	return c.clone()
+}
+
+func (c *cshakeState) MarshalBinary() ([]byte, error) {
+	return c.AppendBinary(make([]byte, 0, marshaledSize+len(c.initBlock)))
+}
+
+func (c *cshakeState) AppendBinary(b []byte) ([]byte, error) {
+	b, err := c.state.AppendBinary(b)
+	if err != nil {
+		return nil, err
+	}
+	b = append(b, c.initBlock...)
+	return b, nil
+}
+
+func (c *cshakeState) UnmarshalBinary(b []byte) error {
+	if len(b) <= marshaledSize {
+		return errors.New("sha3: invalid hash state")
+	}
+	if err := c.state.UnmarshalBinary(b[:marshaledSize]); err != nil {
+		return err
+	}
+	c.initBlock = bytes.Clone(b[marshaledSize:])
+	return nil
+}
+
+// NewShake128 creates a new SHAKE128 variable-output-length ShakeHash.
+// Its generic security strength is 128 bits against all attacks if at
+// least 32 bytes of its output are used.
+func NewShake128() ShakeHash {
+	return newShake128()
+}
+
+// NewShake256 creates a new SHAKE256 variable-output-length ShakeHash.
+// Its generic security strength is 256 bits against all attacks if
+// at least 64 bytes of its output are used.
+func NewShake256() ShakeHash {
+	return newShake256()
+}
+
+func newShake128Generic() *state {
+	return &state{rate: rateK256, outputLen: 32, dsbyte: dsbyteShake}
+}
+
+func newShake256Generic() *state {
+	return &state{rate: rateK512, outputLen: 64, dsbyte: dsbyteShake}
+}
+
+// NewCShake128 creates a new instance of cSHAKE128 variable-output-length ShakeHash,
+// a customizable variant of SHAKE128.
+// N is used to define functions based on cSHAKE, it can be empty when plain cSHAKE is
+// desired. S is a customization byte string used for domain separation - two cSHAKE
+// computations on same input with different S yield unrelated outputs.
+// When N and S are both empty, this is equivalent to NewShake128.
+func NewCShake128(N, S []byte) ShakeHash {
+	if len(N) == 0 && len(S) == 0 {
+		return NewShake128()
+	}
+	return newCShake(N, S, rateK256, 32, dsbyteCShake)
+}
+
+// NewCShake256 creates a new instance of cSHAKE256 variable-output-length ShakeHash,
+// a customizable variant of SHAKE256.
+// N is used to define functions based on cSHAKE, it can be empty when plain cSHAKE is
+// desired. S is a customization byte string used for domain separation - two cSHAKE
+// computations on same input with different S yield unrelated outputs.
+// When N and S are both empty, this is equivalent to NewShake256.
+func NewCShake256(N, S []byte) ShakeHash {
+	if len(N) == 0 && len(S) == 0 {
+		return NewShake256()
+	}
+	return newCShake(N, S, rateK512, 64, dsbyteCShake)
+}
+
+// ShakeSum128 writes an arbitrary-length digest of data into hash.
+func ShakeSum128(hash, data []byte) {
+	h := NewShake128()
+	h.Write(data)
+	h.Read(hash)
+}
+
+// ShakeSum256 writes an arbitrary-length digest of data into hash.
+func ShakeSum256(hash, data []byte) {
+	h := NewShake256()
+	h.Write(data)
+	h.Read(hash)
+}

vendor/golang.org/x/crypto/sha3/shake_noasm.go

@@ -0,0 +1,15 @@
+// Copyright 2023 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build !gc || purego || !s390x
+
+package sha3
+
+func newShake128() *state {
+	return newShake128Generic()
+}
+
+func newShake256() *state {
+	return newShake256Generic()
+}